Amazing Goop II Max Clear

Amazing GOOP II MAX is the ultimate repair glue! It’s toughness is unlike anything else because it remains flexible while permanently bonding virtually any material and withstanding harsh environmental elements. REAL WORLD TOUGH. REAL WORLD USE.

  • UV Inhibitors – Resists yellowing or cracking when exposed to direct sunlight
  • Waterproof – Tough enough to withstand very wet conditions
  • Permanent – Exceptional bond strength to almost any substrate
  • Temperature Resistant – Remains flexible, even in extreme temperatures
  • Dries clear
WARNING: This product can expose you to chemicals including perchloroethylene which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.

INSTRUCTIONS

Follow these step-by-step directions when using Amazing GOOP II Max: 

Read directions and test small area before use.

  1. Surface should be clean, dry, and free from dirt. For best results, roughen surface before use.
  2. Puncture seal in neck of tube using pointer cap. Product can be used between 50 and 90 °F / 10 and 32 °C.
  3. Apply directly to each surface to be bonded or repaired. Allow to partially cure approximately 2 minutes before mating surfaces. Hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive-coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact.
  4. Allow repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
  5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
  6. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.

PRODUCT SPECS

Sizes Available: 2.0 oz
Color: Clear

WARNING: This product can expose you to chemicals including perchloroethylene which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.

DATA SHEETS

SAFETY DATA SHEET

SDS SHEET REQUESTS:  To request an SDS, please use the below link and include the following information

  • Product name and description.
  • Product Sales Part Number or UPC (if available).
  • Product color.
  • Country of usage.
  • Language desired.

SDS Request Email Link:  sds@eclecticproducts.com
TECHNICAL DATA SHEET

US, Canada,Australia – New Zealand English document (English)

FAQS

How long does Amazing GOOP II MAX take to dry?

A full cure takes 24 to 72 hours, depending on the surrounding environment. With lower temperatures and higher humidity, cure time increases; with higher temperatures, cure time decreases. To speed drying time, apply heat using a handheld dryer set on low. Hold dryer at least 6 inches from the surface.

How can Amazing GOOP II MAX be cleaned up?

Small amounts of acetone or citrus-based solvents may be used on uncured adhesive; the adhesive will ball up and brush off. Cured adhesive may be removed by cutting or scraping.

Is Amazing GOOP II MAX water resistant?

Yes. It is water resistant immediately upon application. Apply AG II MAX directly to the surface to be sealed. Use thin coats of AG II MAX to build a thick coating on the surface to be sealed, allowing each layer to set 3 to 4 hours. This is especially ideal for smooth surfaces, such as plastic, glass or ceramic. AG II MAX hardens by solvent evaporation, so allow time for thorough hardening to ensure proper bonding and wear resistance.

What temperature range does Amazing GOOP withstand?

Once cured, AG II MAX will withstand temperatures between -40 °F and 150 °F (-40 °C to 66 °C).

PRODUCT IMAGES

US Product Images
Product Image | 300 dpi / RGB / actual size Product Image | 150 dpi / RGB / 4 inch|600 pixels (H)
AMAZING GOOP II MAX 2.0 fl oz Carded Tube – Clear 300 dpi US AMAZING GOOP II MAX 2.0 fl oz Carded Tube – Clear 150 dpi US
Canadian Product Images
Product Image | 300 dpi / RGB / actual size Product Image | 150 dpi / RGB / 4 inch|600 pixels (H)
AMAZING GOOP II MAX 59.1 mL Carded Tube – Clear 300 dpi CA AMAZINGING GOOP II MAX 59.1 mL Carded Tube – Clear 150 dpi CA
Australia – New Zealand
Product Image | 300 dpi / RGB / actual size Product Image | 150 dpi / RGB / 4 inch|600 pixels (H)
AMAZING GOOP II MAX 81.0 g Carded Tube – Clear 300 dpi AU – NZ AMAZING GOOP II MAX 81.0 g Carded Tube – Clear 150 dpi AU – NZ

Where to Buy

Please check your local store for product availability.