Amazing Goop Trim Repair Clear

Amazing GOOP Trim Repair is a super strong, flexible and durable adhesive that will not crack or break under stress, road vibrations or temperature extremes. It will permanently repair loose and detached trim, weatherstripping and just about anything that should be attached to an automobile. Trim Repair works great on chrome, wood, plastic, metal, rubber and more.

  • Extreme Flex – remains flexible, even in extreme temperatures 
  • Waterproof – bond remains secure even in the wettest road conditions 
  • Nozzle Tip Tube – allows for precise applications 
  • Dries clear – paintable after fully cured 
WARNING: This product can expose you to chemicals including perchloroethylene which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.

INSTRUCTIONS

Follow these step-by-step directions when using Amazing GOOP Trim Repair: 

Read directions and test small area before use.

  1. Surface should be clean, dry, and free from dirt. For best results, roughen surface before use.
  2. Puncture seal in neck of tube using pointer cap. Product can be used between 50 and 90 °F / 10 and 32 °C.
  3. Apply directly to each surface to be bonded or repaired. Allow to partially cure approximately 2 minutes before mating surfaces. Hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive-coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact.
  4. Allow repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
  5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
  6. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.

PRODUCT SPECS

Sizes Available: 1.0 oz
Color: Clear

WARNING: This product can expose you to chemicals including perchloroethylene which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.

DATA SHEETS

SAFETY DATA SHEET

SDS SHEET REQUESTS:  To request an SDS, please use the below link and include the following information

  • Product name and description.
  • Product Sales Part Number or UPC (if available).
  • Product color.
  • Country of usage.
  • Language desired.

SDS Request Email Link:  sds@eclecticproducts.com

TECHNICAL DATA SHEET

US, Mexico English document (Clear) -AMAZING GOOP TRIM REPAIR (English)

FAQS

How long does Amazing GOOP Trim Repair take to dry?
A full cure takes 24 to 72 hours, depending on the surrounding environment. With lower temperatures and higher humidity, cure time increases; with higher temperatures, cure time decreases. To speed drying time, apply heat using a handheld dryer set on low. Hold dryer at least 6 inches from the surface.

How can Amazing GOOP Trim Repair be cleaned up?
Small amounts of acetone or citrus-based solvents may be used on uncured adhesive; the adhesive will ball up and brush off. Cured adhesive may be removed by cutting or scraping.

Is Amazing GOOP Trim Repair water resistant?
Yes. It is water resistant immediately upon application. The adhesive hardens by solvent evaporation, so allow time for thorough hardening to ensure proper bonding and wear resistance.

What temperature range does Amazing GOOP Trim Repair withstand?
Amazing GOOP Trim Repair is best when applied in temperatures ranging from 50 °F to 90 °F (10 °C to 32 °C). (Note: can be applied outside this temperature range, but cure time may increase significantly.) Once cured, Amazing GOOP Trim Repair can withstand temperatures between -40 °F and 150 °F (-40 °C to 66 °C).

PRODUCT IMAGES

US
300 dpi / RGB / actual size

150 dpi / RGB / 4 inch|600 pixels (H)
AMAZING GOOP TRIM REPAIR 1.0 fl oz Carded Tube -Clear 300 dpi US AMAZING GOOP TRIM REPAIR 1.0 fl oz Carded Tube -Clear 150 dpi US

Where to Buy

Please check your local store for product availability.