Amazing GOOP Anti-Skid Epoxy with Grit

Amazing GOOP Anti-Skid Epoxy provides a hard, flat, textured finish that helps avoid slip and fall accidents. It can be used indoors and outdoors in areas where water is present or slippery conditions exist. Anti-Skid Epoxy is friendly on bare feet. Its formula is lead-free and chemical, gas and oil resistant.

• Use on surfaces such as wood, metal, fiberglass, tile, porcelain and more
• Resists water, chemicals, gas and oil 
• Dry to touch in 10 to 20 minutes at 77° F / 25° C and dries completely in 24 hours

Use Anti-Skid on:
• Stairs, ladders and walkways
• Porches and decks 
• Ramps and patios 
• Boats: Decks, bow and ladders
• Trailers
• Docks: Marina and loading areas
• Pools: Decks, ladders and diving boards
• Floors: Basement and garage
• Hydraulic and forklift equipment


Product specs

Sizes Available: 11.0 oz
Color: Clear

Instructions for Safe Use

Follow these step-by-step directions when using Amazing GOOP Anti-Skid Epoxy:

1. Surface should be dry, clean and free of oil, wax, dirt, loose paint and other contaminants. If necessary, remove all the old paint down to the original surface. Aluminum surfaces should be treated first before applying Anti-Skid. Wood surfaces should be primed with an oil based primer. Test a small area for color compatibility and adhesion.
2. For best results, spray between 70 and 90 °F (21 and 32 °C). Applying Anti-Skid Epoxy below 50 °F (10 °C) will cause the paint to spray or dry improperly.
3. Mix contents of can well by shaking for 2-3 minutes. Mixing ball will roll freely when properly mixed. Continue to shake can intermittently for 10 seconds during use.
4. To apply, spray in a sweeping motion 12 to 15 inches away from surface.
5. IMPORTANT: Clean valve immediately after each use. Hold can upside down and spray until only clear gas comes out (3-5 seconds). If spray valve becomes clogged, pull off and clean in lacquer thinner.
6. Overspray can be removed with paint or lacquer thinner.

Data Sheets

US Documents
US English (Clear)
Spanish (Clear)
Canada Documents
Canadian French (Clear)

US English document


How long does Amazing GOOP take to dry? 
Dries to touch in 10-20 minutes at 77 °F (25 °C).  It can be handled or recoated in approximately 1 hour and the surface is ready for heavy foot traffic after 24 hours.

What is the best way to keep the Anti-Skid  spray nozzle clean?
Clean valve immediately after each use by holding can upside down and spraying until clear gas comes out (3-5 seconds). If spray valve becomes clogged, pull off and clean in lacquer thinner.

Is Anti-Skid water resistant?
Yes. However, it is not recommended for surfaces that will be subjected to standing water or be submersed under water for an extended period of time.

Can Anti-Skid be removed?
Yes, Anti-Skid can be removed by sanding once it is dry.

How much surface area will the Anti-Skid can cover?
Each can will cover up to 15 sq. ft.

Product Images

300 dpi / RGB / actual size

150 dpi / RGB / 4 inch|600 pixels (H)
AMAZING GOOP ANTI-SKID 11.0 oz Can - Clear 300 dpi US AMAZING GOOP ANTI-SKID 11.0 oz Can - Clear 150 dpi US

300 dpi / RGB / actual size

150 dpi / RGB / 4 inch|600 pixels (H)
AMAZING GOOP ANTI-SKID 311.8 g Can - Clear 300 dpi CA AMAZING GOOP ANTI-SKID 311.8 g Can - Clear 150 dpi CA


Do-It-Yourselfers, Crafters, Professionals and Woodworkers.

We manufacture products that work for you. Check out our products to find an adhesive, epoxy, wood filler and more for your projects.


U.S. and Canada Retail Catalog - Feb., 2018
      US - Hi Res
      US - Low Res


Industrial Catalog - January, 2016
      US Industrial - Hi Res
      US Industrial - Low Res


European Union Catalog - Feb., 2018
      European Union - Hi Res
      European Union - Low Res


Middle East Arabic Catalog - June, 2017
      Middle East Arabic - Hi Res
      Middle East Arabic - Low Res


Middle East Hebrew Catalog - July, 2017
      Middle East Hebrew - Hi Res
      Middle East Hebrew - Low Res