E6000 Plus

E6000 PLUS offers virtually the same performance characteristics you love about E6000 but without the odor! It’s formulated using a premium polymer technology and can be used on most any substrate and in just about any application. The waterproof formula and all-weather performance make E6000 PLUS ideal for indoor and outdoor applications. Excellent adhesion to wood, glass, fabric, ceramic, gems, metal, marble, fiberglass, concrete, most plastics, Lexan and much more.

  • Low odor
  • Crystal clear
  • Superb UV resistance
  • Paintable
  • Remains flexible after curing
  • Maintains its permanent bond strength
  • Washer-dryer safe
  • Acid-free

INSTRUCTIONS

Follow these step-by-step directions when using E6000 PLUS:

Read directions and test small area for adhesion before use. Surface should be clean, dry and free of dirt. For best adhesion on smooth, non-porous materials, lightly roughen surface before use. Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). Once fully cured, the adhesive can withstand temperatures from -40 to 200 ºF (-40 to 93 ºC) intermittently.

  1. Puncture seal in neck of tube using pointer cap.
  2. Apply directly to surfaces to be bonded or repaired. NOTE: For non-porous surfaces, apply adhesive, mate surfaces together, pull apart for 5 minutes, then re-mate surfaces permanently.
  3. To close tube properly,remove air in the tube by squeezing product slightly past end of the opening, then tightly recap. Dried product can easily be removed.
  4. Allow 24 hours for full cure. Depending on substrates and temperature, maximum bond strength may not be reached for up 72 hours.
  5. Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.
  6. Not recommended for use on acrylic, vinyl, foam, polyethylene and polypropylene. Store in a cool, dry place.

Tip: For quick emergency repairs, lightly mist the substrate with moisture prior to applying adhesive.

PRODUCT SPECS

Sizes Available: 0.9 fl oz and 1.9 fl oz
Color: Crystal Clear

DATA SHEETS

SAFETY DATA SHEET

SDS SHEET REQUESTS:  To request an SDS, please use the below link and include the following information:

  • Product name and description
  • Product Sales Part Number or UPC (if available)
  • Product color
  • Country of usage
  • Language desired

SDS Request Email Link:  sds@eclecticproducts.com

TECHNICAL DATA SHEET

E6000 Plus-us-ca-eu (English)

FAQ

How long does E6000 PLUS take to dry?
Allow 24 hours for full cure. Depending on substrates and temperature, maximum bond strength may not be reached for up 72 hours.

Can the cure time be sped up? Yes. For quick emergency repairs, lightly mist the substrate with moisture prior to applying adhesive. Application on damp and wet surfaces may slightly affect adhesion.

How can E6000 PLUS be cleaned up? Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.

What temperature is best to apply E6000 PLUS? Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). Once fully cured, the adhesive can withstand temperatures from -40 to 200 ºF (-40 to 93 ºC) intermittently.

Is E6000 PLUS waterproof, UV resistant and washer/dryer safe?
 Yes.

Can E6000 PLUS be painted over once cured? Yes. Paintable on most brands/types of water-based paints. Test small area before use.

What is the best way to prolong the life of the unused product in the tube? After use, remove air in the tube by squeezing product slightly past end of the opening, then tightly recap. Dried product can easily be removed.

What materials can E6000 PLUS be used on? Use on all your INDOOR / OUTDOOR DIY or craft projects requiring a permanent bond. EXCELLENT ADHESION TO: Wood, Glass, Fabric, Ceramic, Gems, Metals, Marble, Fiberglass, Concrete, most Plastics, Lexan, Plexiglass & much more!

What is the best way to clean-up E6000 PLUS? Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.

Can E6000 PLUS be sanded? Yes. E6000 PLUS sands easily. The cured adhesive sands off at different rates depending on grit of sandpaper. Carefully cut away as much excess cured adhesive as possible; and then use coarse grit sandpaper (60 or 80) to remove any remaining unwanted material. A finer grit (over 200) can be used for finish work.

PRODUCT IMAGES

US
300 dpi / RGB / actual size
150 dpi / RGB / 4 inch
E6000 PLUS 0.9 fl oz Carded Tube – Clear 300 dpi US E6000 PLUS 0.9 fl oz Carded Tube – Clear 150 dpi US
E6000 PLUS 1.9 fl oz Carded Tube – Clear 300 dpi US E6000 PLUS 1.9 fl oz Carded Tube  – Clear 150 dpi US
EUROPEAN
300 dpi / RGB / actual size
150 dpi / RGB / 4 inch
E6000 PLUS 26.6 mL Carded Tube – Clear 300 dpi EU E6000 PLUS 26.6 mL Carded Tube – Clear 150 dpi EU
E6000 PLUS 56.1 mL Carded Tube – Clear 300 dpi EU E6000 PLUS 56.1 mL Carded Tube – Clear 150 dpi EU
CANADA
300 dpi / RGB / actual size
150 dpi / RGB / 4 inch
E6000 PLUS 26.6 mL Carded Tube – Clear 300 dpi CA E6000 PLUS 26.6 mL Carded Tube – Clear 150 dpi CA
E6000 PLUS 56.1 mL Carded Tube – Clear 300 dpi CA E6000 PLUS 56.1 mL Carded Tube – Clear 150 dpi CA

Where to Buy

Please check your local store for product availability.