INSTRUCTIONS
Follow these step-by-step directions when using E6000 Spray Adhesive:
- Read all directions before using.
- Shake vigorously before use.
- Protect surrounding area from overspray.
- Point spray tip away from face.
- Hold bottle 8-10 inches away from surface.
- PAPER, PHOTOS, CARDBOARD & FOIL: Spray a thin, light coat to one surface. Join materials and continue to apply pressure periodically making sure to secure corners. Allow to dry 1-3 minutes.
- POROUS MATERIALS (including foams and Styrofoam: Spray a heavy coat to both surfaces to be joined. Mate surfaces together. Allow to dry.*
- NON-POROUS MATERIALS: Spray a light coat to one surface. Mate surfaces together. Allow to dry.*
- IMPORTANT – CLEAN AFTER EACH USE: To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through sprayer until all adhesive is cleared out. Then dry, replace in the bottle, secure cap. *Maximum strength may not be reached for 1-5 hours. Styrofoam may require an overnight cure.