Famowood Glaze Coat Clear Epoxy
This ultra-clear, high gloss finishing epoxy is ideal for home improvement and craft projects. FAMOWOOD Glaze Coat is a pour-on epoxy coating that can be used on most surfaces – rough or smooth, stained or painted. It’s great for coating tables or bar tops, preserving photographs or imbedding decorative items. Just one coat equals 70 coats of varnish!
- Easy 1:1 mixing ratio
- Versatile – use on any non waxy material
- Self-leveling – minimal spreading required
- Indoor use
- Resists temperatures up to 120 °F
PRODUCT SPECS
Sizes Available: | Pint, Quart, Gallon Kits |
Color: | Clear |
DATA SHEETS
SAFETY DATA SHEET
SDS SHEET REQUESTS: To request an SDS, please use the below link and include the following information
- Product name and description.
- Product Sales Part Number or UPC (if available).
- Product color.
- Country of usage.
- Language desired.
SDS Request Email Link: sds@eclecticproducts.com
TECHNICAL DATA SHEET | ||
FAQS
What is FAMOWOOD GLAZE COAT High Build Epoxy Coating?
FAMOWOOD Glaze Coat is superior, ultra clear, two-part, 1:1, high build epoxy coating.
What is FAMOWOOD GLAZE COAT High Build Epoxy Coating used on?
Glaze Coat may be used on a variety of surfaces: smooth or rough, stained or painted:
- Wood
- Cloth
- Styrofoam™
- Metal
- Paper
- Rock
- Leather
- Decals
- Masonry
- Pine Cones
- Oil Paintings
- Tile
- Unfired Clay
Is FAMOWOOD GLAZE COAT heat resistant?
Heat resistance is approximately 120 °F once fully cured. Coaster or hot pads MUST be used when placing hot objects on Glaze Coated surfaces. Hot objects may leave impressions on a FAMOWOOD Glaze Coat surface. The Glaze Coat is tough, yet flexible to avoid shattering on impact. Impressions usually disappear in a few hours at normal 72-75 °F room temperatures. The warmer the environment, the quicker impressions appear and disappear
TINTING FAMOWOOD GLAZE COAT EPOXY RESIN
IN GENERAL: Unicorn SPiT is the recommended colorant creating either a translucent or opaque coating depending on the amount added. All pigment additives react differently as far as compatibility, stirring time, bubble generation and translucency degree. It is recommended to start with less colorant and increase as needed. Generally, when adding pigment, it is recommended to not add more than a 3% (by weight) ratio. Test the colorant with a small amount of Glaze Coat prior to project application. Water-based colorants may reduce gel time. The finished Glaze Coat hardness may decrease slightly when adding colorants.
RECOMMENDED COLORANT TYPES
- UNICORN SPiT: Creates either a transparent or opaque coating depending on the amount added. Do not use more than 1 part Unicorn SPiT to 5 parts epoxy. See instructions below.
- ALCOHOL INKS: Creates a vibrant and semi-transparent appearance. Alcohol inks work well in not producing many bubbles.
- OIL-BASED/ENAMEL PAINT: Some oil-based paints disperse more readily than others. Depending on the color, some create an opaque appearance while others create a translucent appearance.
- GLITTER AND MICA: Glitter and mica disperse well when using in thin coat applications (approx. 1/8” and under).
- LIQUID DYES, FOOD DYES & WATER-BASED INKS: Produce a semi-transparent coating when using in thin coat applications (approx. 1/8” and under).
- ACRYLIC/WATER-BASED PAINT: Acrylic and water-based pigments can be used. Some disperse better than others. Color saturation is dependent on the color and brand used. Water-based paints sometime produce more bubbles due to the water throughout the mixture.
- SOLVENT-BASED STAINS: The addition of solvent-based stains normally produced a dark, translucent to opaque coating.
COLORANT TYPES NOT RECOMMENDED
- POWDER PIGMENTS: Not recommended as the powder does not dissolve well.
- CONCRETE LIQUID DYES: Not recommended.
- METAL OXIDE PIGMENTS: Some colors may not be compatible.
DIRECTIONS FOR UNICORN SPIT:
- Measure and Mix Glaze Coat as directed.
- Add drops of undiluted Unicorn SPiT to achieve desired color. DO NOT use more than 1-part Unicorn SPiT to 5-parts epoxy. Remember…A tiny bit of Unicorn SPiT goes a long way.
- If multiple colors are desired, gather smaller containers to work with in advance. Measure, mix, and pour Glaze Coat epoxy immediately into smaller containers and add Unicorn SPiT.
- Pour tinted epoxy onto project. For best results, a pour thickness of no more than 1/16” is recommended.
- Follow epoxy pouring, curing and clean-up instructions.
PRODUCT IMAGES
US 300 dpi / RGB / actual size |
150 dpi / RGB / 4 inch|600 pixels (H) |
FAMOWOOD GLAZE COAT Epoxy Pint Kit 300 dpi US | FAMOWOOD GLAZE COAT Epoxy Pint Kit 150 dpi US |
FAMOWOOD GLAZE COAT Epoxy Quart Kit 300 dpi US | FAMOWOOD GLAZE COAT Epoxy Quart Kit 150 dpi US |
FAMOWOOD GLAZE COAT Epoxy Gallon Kit 300 dpi US | FAMOWOOD GLAZE COAT Epoxy Gallon Kit 150 dpi US |
CANADIAN 300 dpi / RGB / actual size |
150 dpi / RGB / 4 inch|600 pixels (H) |
FAMOWOOD GLAZE COAT Epoxy 0.94 L Kit 300 dpi CAN | FAMOWOOD GLAZE COAT Epoxy 0.94 Kit 150 dpi CAN |
FAMOWOOD GLAZE COAT Epoxy 3.78 L Kit 300 dpi CAN | FAMOWOOD GLAZE COAT Epoxy 3.78 Kit 150 dpi CAN |
Australia – New Zealand 300 dpi / RGB / actual size |
150 dpi / RGB / 4 inch|600 pixels (H) |
FAMOWOOD GLAZE COAT Epoxy 0.47 L Kit 300 dpi AU | FAMOWOOD GLAZE COAT Epoxy 0.47 L Kit 150 dpi AU |
FAMOWOOD GLAZE COAT Epoxy 0.94 L Kit 300 dpi AU | FAMOWOOD GLAZE COAT Epoxy 0.94 L Kit 150 dpi AU |
FAMOWOOD GLAZE COAT Epoxy 3.78 L Kit 300 dpi AU | FAMOWOOD GLAZE COAT Epoxy 3.78 L Kit 150 dpi AU |
Featured Projects
Where to Buy
Please check your local store for product availability.