QuickHOLD

QuickHOLD is an all-purpose adhesive with a thin, quick dry formula that’s perfect for craft projects. The quick-dry formula is ideal for items requiring immediate movement. QuickHOLD bonds easily to metal, stones, jewels and much more.

  • Thin viscosity – ideal for delicate applications 
  • Quick dry – sets in 10-12 minutes 
  • Dries clear 
  • Water resistant 
  • Paintable once cured
WARNING: This product can expose you to chemicals including acetaldehyde and vinyl chloride which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

INSTRUCTIONS

Read directions and test small area before use. Hold tube upright until ready to use.
USE AS A CONTACT ADHESIVE: Spread coating on each surface to be joined together. Allow to cure 2 minutes before mating surfaces. Quick Hold hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive coated surfaces are placed in contact and sufficient pressure is exerted to create full contact between both surfaces.
DRY TIME: 10 – 12 min. (set); 5 – 8 hrs. (full cure).
TEMPERATURE RANGE: -40 to 150 °F (-40 to 66 °C).
UV RESISTANCE: Paint over for maximum resistance.
CHEMICAL RESISTANCE: Resistant to gasoline, alcohol, paint thinner and most solvents.

PRODUCT SPECS

Sizes Available: 1.0 oz, 2.0 oz
Color: Clear

WARNING: This product can expose you to chemicals including Vinyl chloride, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

DATA SHEETS

SAFETY DATA SHEET

SDS SHEET REQUESTS:  To request an SDS, please use the below link and include the following information

  • Product name and description.
  • Product Sales Part Number or UPC (if available).
  • Product color.
  • Country of usage.
  • Language desired.

SDS Request Email Link:  sds@eclecticproducts.com

TECHNICAL DATA SHEET

QH_TDS USA_MEX_CAN_MPK_Rev 01.pdf (English)

 

FAQS

How long does QuickHOLD take to dry?
A full cure takes 2 to 6 hours, depending on the surrounding environment. With lower temperatures and higher humidity, cure time increases; with higher temperatures, cure time decreases.

How can QuickHOLD be cleaned up?
Small amounts of acetone or naphtha may be used on uncured adhesive; the adhesive will ball up and brush off. Cured adhesive may be removed by cutting or scraping.

Is QuickHOLD water resistant?
Yes. QuickHOLD is water resistant immediately upon application. Use thin coats of product to build a thick coating on the surface to be sealed, allowing each layer to set 2 to 6 hours. This is especially ideal for smooth surfaces, such as plastic, glass or ceramic.

What temperature range does QuickHOLD withstand?
QuickHOLD is best when applied in temperatures ranging from 70 °F to 90 °F (21 °C to 32 °C). (Note: QuickHOLD can be applied outside this temperature range, but cure time may increase significantly.) Once cured, QuickHOLD can withstand temperatures between -40 °F and 150 °F (-40 °C to 66 °C).

Where to Buy

Please check your local store for product availability.