Seal-All Clear

Seal-All is the adhesive mechanics and hobbyists trust for all their automotive and garage repairs. It adheres with superior strength to most substrates and resists gasoline, oil, paint thinner and most solvents.

  • Fast dry time – set in 10-12 minutes 
  • E-Z flow formula 
  • Gas & oil resistant 
  • Water resistant – bond remains secure even when exposed to water 
  • Abrasion resistant 
  • Temperature resistant – remains tough even in extreme temperatures
WARNING: This product can expose you to chemicals including acetaldehyde which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.

INSTRUCTIONS

Read directions and test small area before use. Hold tube upright until ready to use.
USE AS A CONTACT ADHESIVE: Spread coating on each surface to be joined together. Allow to cure 2 minutes before mating surfaces. Seal-All hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive coated surfaces are placed in contact and sufficient pressure is exerted to create full contact between both surfaces.
DRY TIME: 10 – 12 min. (set); 5-8 hrs. (full cure).
TEMPERATURE RANGE: -40 to 150 °F (-40 to 66 °C).
UV RESISTANCE: Paint over for maximum resistance.
CHEMICAL RESISTANCE: Resistant to gasoline, alcohol, paint thinner and most solvents.

PRODUCT SPECS

Sizes Available: 1.0 fl oz, 2.0 fl oz
Color: Clear

WARNING: This product can expose you to chemicals including Vinyl chloride, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

DATA SHEETS

SAFETY DATA SHEET

SDS SHEET REQUESTS:  To request an SDS, please use the below link and include the following information

  • Product name and description.
  • Product Sales Part Number or UPC (if available).
  • Product color.
  • Country of usage.
  • Language desired.

SDS Request Email Link:  sds@eclecticproducts.com

TECHNICAL DATA SHEET

SA TDS USA CAN MEX_5.25.23 Rev 01 (English)

FAQS

What is the most unique feature of Seal-All?
Seal-All is resistant to gasoline, oil, paint thinner, and most solvents. Seal-All is also water resistant immediately upon applications.

What substrates will Seal-All bond to?
Seal-All adheres with superior strength to all substrates and materials except paper, cardboard and Styrofoam™. Always test a small area before full use.

How long does it take for Seal-All to dry?
Seal-All will set in 2-3 minutes and reaches full-cure in 2-6 hours. (Note: temperature and humidity will affect dry time.)

Is Seal-All UV resistant?
No. Seal-All may be painted over for maximum UV resistance once cured.

What are some suggested uses for Seal-All?
Use for distributor caps, interior panels, radiators, gaskets, transmission carburetor floats, body and trunk leaks, battery cables and terminals, generators, tools and much more.

Where to Buy

Please check your local store for product availability.