UNICORN SPiT Gel Stain and Glaze in One!

UNICORN SPiT allows anyone to turn ordinary objects into personalized MASTERPIECES!
Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new - or - refinishing thousands of projects. Excellent for Crafters, Makers, Hobbyists, DIYers and Pros too!

•  PAINT, GEL STAIN and GLAZE in One!
•  10 vibrant colors!
•  Make your project as opaque or vibrant as your dreams require.
   Use as a PAINT or dilute with water to create a GEL, GLAZE, STAIN, WHITE WASH
   or ANTIQUING TINT!
•  Penetrates deep into the bare wood grain or glazes over existing finishes,
   brightens and highlights chalk paint, and provides a 3-D dimensional effect
•  Jasmine scented
•  Use indoors or outdoors

$99.00

Product specs

Sizes Available: 4.0 fl oz (118.2 mL), 8.0 fl oz (236.5 mL)
Colors: Available in 10 colors
   

Instructions for Safe Use

Use Unicorn SPiT® as a paint, gel or stain on most any material. Create masterpieces on wood, glass, metal, fabric, pottery, concrete, laminate, wicker and most other substrates.

GENERAL DIRECTIONS:

SHAKE WELL and test small area before use. Can be applied with a brush, foam pad, or your hands! Dry time depends upon thickness of the application. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears. Unicorn SPiT dries quickly. Use a spray bottle of water to keep product from drying out and to easily manipulate. Once dry, use FAMOWOOD GLAZE COAT or other non-waterbased coatings to protect add gloss and dimension.

  1. Laminate use: Sand the surface with 220 sand paper after cleaning, then dust well before applying
  2. Glass: To add durability to the exterior of regularly handled items, put a thin layer of DISHWASHER SAFE decoupage on the surface, allow to dry, then apply Unicorn SPiT.
  3. Fabric use: Use Unicorn SPiT full strength for “stamping” (creating design on a separate surface and then “stamping” it on to a fabric project). Then, use a water bottle and your hand or brush to blend. For “direct to fabric” projects, mix Unicorn SPiT with 6 parts water in a spray bottle or cup and brush it on, drip it on or spray it on. Use a product intended for waterproofing fabric after Unicorn SPiT has completely dried.

Recommended dilution ranges:

Treatment / Application Type Water Dilution Ratio
PAINT / HEAVY GLAZE or ANTIQUING
/ DRY BRUSHING
0-10%
LIGHT GLAZE / LIGHT WHITE-WASH
/ LIGHT ANTIQUING
10-30%
WOOD STAIN (BARE WOOD) /
DYE FOR STAINED SURFACES
30-50%
DISTRESSED WOOD (BARE WOOD) 50-70%
FABRIC (Up to 85% water for spraying) 60-80%
CONCRETE 0-90%
GLASS 0-30%

 

 

 

 

 

 

 

 

NOTE: Distilled or purified water is recommended rather than hard or high mineral water.

DIRECTIONS FOR USE AS A PAINT, HEAVY GLAZE, or ANTIQUING/DRY BRUSHING ON WOOD, GLASS, METAL, FABRIC, POTTERY, WICKER, CONCRETE AND LAMINATE:

  1. SHAKE BEFORE USING.
  2. Use Unicorn SPiT right out of the bottle for a paint application or dilute it up to 10% with water for antiquing or dry brushing.  Diluting Unicorn SPiT with water allows you to control the opaqueness.  For antiquing or dry brushing, add 10 parts Unicorn SPiT in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 1 part water until the desired effect is achieved.
  3. Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from contacting the bare surface.
  4. Continue to add or blend multiple colors to the surface in separate areas creating designs to achieve the desired look.
  5. Allow to dry.  Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.
  6. After drying, lightly buff the surface with a fine grain sandpaper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.
  7. Dust off thoroughly.
  8. Seal with FAMOWOOD GLAZE COAT or most any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High gloss sealers will help achieve a three dimensional look.

 


DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:

  1. SHAKE BEFORE USING
  2. Dilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.
  3. Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.
  4. Continue to add or blend multiple colors to the surface in separate areas creating designs to achieve the desired look.
  5. Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.
  6. Apply to unsealed chalk or mineral style paint to create custom color highlighting and lowlighting before sealing.
  7. Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.
  8. Seal with FAMOWOOD GLAZE COAT or most any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.


DIRECTIONS FOR USE AS A STAIN OR DYE:

  1. SHAKE BEFORE USING.
  2. Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface.  Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water.  Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.
  3. Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.
  4. Continue to add or blend multiple colors to the surface in separate areas creating designs to achieve the desired look.
  5. Allow to dry.  Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.
  6. After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.
  7. Dust off thoroughly.
  8. Seal with FAMOWOOD GLAZE COAT or most any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.


TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.

CUSTOM COLORS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colors.


Data Sheets

SAFETY DATA SHEET
US_CANADA English document
 

European Documents
English (Request SDS) sds@eclecticproducts.com
French (Request SDS) sds@eclecticproducts.com
German (Request SDS) sds@eclecticproducts.com
Spanish (Request SDS) sds@eclecticproducts.com


TECHNICAL DATA SHEET
US English document

FAQs

What makes UNICORN SPiT so special?

It can be used as a PAINT or dilute it with water to create a GEL, GLAZE, STAIN, WHITE WASH or ANTIQUING TINT…AND comes in 10 vibrant colors!  This AIN’T your daddy’s stain!


What substrates does UNICORN SPiT work on?

Wood, Glass, Metal, Fabric, Pottery, Wicker, Concrete, Laminate and more!

 

What are the approximate water dilution percentages needed to create various treatement? 

Treatment / Application Type Water Dilution Ratio
PAINT / HEAVY GLAZE or ANTIQUING
/ DRY BRUSHING
0-10%
LIGHT GLAZE / LIGHT WHITE-WASH
/ LIGHT ANTIQUING
10-30%
WOOD STAIN (BARE WOOD) /
DYE FOR STAINED SURFACES
30-50%
DISTRESSED WOOD (BARE WOOD) 50-70%
FABRIC (Up to 85% water for spraying) 60-80%
CONCRETE 0-90%
GLASS 0-30%

 

 

 

 

 

 





Can UNICORN SPiT be used outdoors?

Yes.  Make sure to protect your masterpiece first with finishes/coatings that are oil-based.  Water-based coatings will alter the look of Unicorn SPiT.  For a high gloss finish, seal with Famowood Glaze Coat. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.

 

Will UNICORN SPiT applied to fabric be water resistant and machine washable?

Yes, but it must be treated first.  Use a product intended for waterproofing fabric after Unicorn SPiT has completed dried.

 

Can custom colors be created? 

Yes. Mix Unicorn SPiT colors together to create your own special color OR mix most any water-based paint (chalk style or mineral based) with Unicorn SPiT to create custom colors.

Product Images

US Product Images 4.0 fl oz bottle

Product Image | 300 dpi / RGB / actual size Product Image | 150 dpi / RGB / 4 inch | 600 pixels (H)
Unicorn Spit 4 oz - Midnight’s Blackness 300 dpi US Unicorn Spit 4 oz - Midnight’s Blackness 150 dpi US
Unicorn Spit 4 oz - Blue Thunder 300 dpi US Unicorn Spit 4 oz - Blue Thunder 150 dpi US
Unicorn Spit 4 oz - Dragonsbelly 300 dpi US Unicorn Spit 4 oz - Dragonsbelly 150 dpi US
Unicorn Spit 4 oz - Lemon Kiss 300 dpi US Unicorn Spit 4 oz - Lemon Kiss 150 dpi US
Unicorn Spit 4 oz - Molly Red Pepper 300 dpi US Unicorn Spit 4 oz - Molly Red Pepper 150 dpi US
Unicorn Spit 4 oz - Phoenix Fire 300 dpi US Unicorn Spit 4 oz - Phoenix Fire 150 dpi US
Unicorn Spit 4 oz - Pixie Pink Punk 300 dpi US Unicorn Spit 4 oz - Pixie Pink Punk 150 dpi US
Unicorn Spit 4 oz - Purple Hill Majesty 300 dpi US Unicorn Spit 4 oz - Purple Hill Majesty 150 dpi US
Unicorn Spit 4 oz - White Ning 300 dpi US Unicorn Spit 4 oz - White Ning 150 dpi US
Unicorn Spit 4 oz - Zia Teal 300 dpi US Unicorn Spit 4 oz - Zia Teal 150 dpi US

US Product Images 8.0 fl oz bottle

Product Image | 300 dpi / RGB / actual size Product Image | 150 dpi / RGB / 4 inch | 600 pixels (H)
Unicorn Spit 8 oz - Midnight’s Blackness 300 dpi US Unicorn Spit 8 oz - Midnight’s Blackness 150 dpi US
Unicorn Spit 8 oz - Blue Thunder 300 dpi US Unicorn Spit 8 oz - Blue Thunder 150 dpi US
Unicorn Spit 8 oz - Dragonsbelly 300 dpi US Unicorn Spit 8 oz - Dragonsbelly 150 dpi US
Unicorn Spit 8 oz - Lemon Kiss 300 dpi US Unicorn Spit 8 oz - Lemon Kiss 150 dpi US
Unicorn Spit 8 oz - Molly Red Pepper 300 dpi US Unicorn Spit 8 oz - Molly Red Pepper 150 dpi US
Unicorn Spit 8 oz - Phoenix Fire 300 dpi US Unicorn Spit 8 oz - Phoenix Fire 150 dpi US
Unicorn Spit 8 oz - Pixie Pink Punk 300 dpi US Unicorn Spit 8 oz - Pixie Pink Punk 150 dpi US
Unicorn Spit 8 oz - Purple Hill Majesty 300 dpi US Unicorn Spit 8 oz - Purple Hill Majesty 150 dpi US
Unicorn Spit 8 oz - White Ning 300 dpi US Unicorn Spit 8 oz - White Ning 150 dpi US
Unicorn Spit 8 oz - Zia Teal 300 dpi US Unicorn Spit 8 oz - Zia Teal 150 dpi US


EUROPEAN Product Images 118.2 fl oz bottle

Product Image | 300 dpi / RGB / actual size Product Image | 150 dpi / RGB / 4 inch | 600 pixels (H)
Unicorn Spit 118.2 mL - Midnight’s Blackness 300 dpi EU Unicorn Spit 118.2 mL - Midnight’s Blackness 150 dpi EU
Unicorn Spit 118.2 mL - Blue Thunder 300 dpi EU Unicorn Spit 118.2 mL - Blue Thunder 150 dpi EU
Unicorn Spit 118.2 mL - Dragonsbelly 300 dpi EU Unicorn Spit 118.2 mL - Dragonsbelly 150 dpi EU
Unicorn Spit 118.2 mL - Lemon Kiss 300 dpi EU Unicorn Spit 118.2 mL - Lemon Kiss 150 dpi EU
Unicorn Spit 118.2 mL - Molly Red Pepper 300 dpi EU Unicorn Spit 118.2 mL - Molly Red Pepper 150 dpi EU
Unicorn Spit 118.2 mL - Phoenix Fire 300 dpi EU Unicorn Spit 118.2 mL - Phoenix Fire 150 dpi EU
Unicorn Spit 118.2 mL - Pixie Pink Punk 300 dpi EU Unicorn Spit 118.2 mL - Pixie Pink Punk 150 dpi EU
Unicorn Spit 118.2 mL - Purple Hill Majesty 300 dpi EU Unicorn Spit 118.2 mL - Purple Hill Majesty 150 dpi EU
Unicorn Spit 118.2 mL - White Ning 300 dpi EU Unicorn Spit 118.2 mL - White Ning 150 dpi EU
Unicorn Spit 118.2 mL - Zia Teal 300 dpi EU Unicorn Spit 118.2 mL - Zia Teal 150 dpi EU

ABOUT ECLECTIC

Do-It-Yourselfers, Crafters, Professionals and Woodworkers.

We manufacture products that work for you. Check out our products to find an adhesive, epoxy, wood filler and more for your projects.

 

 

Retail Catalog - January, 2016
      US & Canada - Hi Res
      US & Canada - Low Res

 

 

Industrial Catalog - January, 2016
      US - Hi Res
      US - Low Res

 

 

European Union Catalog - November, 2016
      European Union - Hi Res
      European Union - Low Res

FACEBOOK

TWITTER