ProCRETE Premium Concrete Repair – Self-Leveling
PROCRETE PREMIUM CONCRETE REPAIR is a superior self-leveling, 2-component urethane concrete patch for crack, hole and spall repairs. Unlike cement-based patches, it creates a permanent repair for damaged concrete that will not crack, shrink or lose its adhesion to the repaired area — even after years of severe weather. THE ONCE-AND-DONE FAST, PERMANENT SOLUTION!
- 10X tougher than concrete!
- Made with the same urethane technology as specified by bridge, airport and highway engineers
- Deep patch repair – fill up to 10 feet
- Interior/exterior
- Easy to use – mix right inside the pouch/bucket
- Self-leveling – use for horizontal applications
- Remains intact and permanent through freeze/thaw and extreme heat cycles year-after-year
- Maintains its integrity when exposed to deicing salts used on roads to improve safety
- Drive over ready/return to service as soon as 2 hours
- Bucket kits contain optional materials – black pigment along with tan and black topping sand for additional customization
WARNING: This product can expose you to chemicals including Titanium dioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
PRODUCT SPECS
| Sizes Available: | Quart, Gallon Kits |
| Color: | Clear |
DATA SHEETS
SAFETY DATA SHEET
SDS SHEET REQUESTS: To request an SDS, please use the below link and include the following information
- Product name and description.
- Product Sales Part Number or UPC (if available).
- Product color.
- Country of usage.
- Language desired.
SDS Request Email Link: sds@eclecticproducts.com
| TECHNICAL DATA SHEET | ||
PROCRETE PREM CONCRETE Self-leveling_TDS_REV 4 (English) |
||
FAQS
PLEASE READ AND FOLLOW ALL INSTRUCTIONS BEFORE STARTING.
What is the coverage for a 5.0 fl oz pouch?
SQUARE INCH COVERAGE: 9.0 sq in @ 1” D / 18.0 sq in @ .5″ D / 36.0 sq in @ .25″ D.
LINEAR COVERAGE: 36.0 linear in @ .25” W x 1” D / 72.0 linear in @ .25” W x .5” D.
What is the coverage for a 25.0 fl oz pouch?
SQUARE FOOT COVERAGE: .31 sq ft @ 1.0″ D / .62 sq ft @ .5″ D / 1.25 sq ft @ .25″ D.
LINEAR COVERAGE: 3.75 linear feet @ 1” W x 1” D / 7.5 linear feet @ 1” W x .5” D / 15.0 linear feet @ 1” W x .25” D.
Is ProCrete water resistant?
Yes.
Is ProCrete chemical resistant and resistant to oil and grease?
Yes.
What color is ProCrete Premium Concrete Repair – Self-Leveling?
Gray.
What is the working time?
15 – 20 min at 77 °F (from start of mixing).
What is the cure time/open to traffic
2 hours at 70 °F (minimum). Higher temperatures will speed up cure; lower temperatures slow down cure.
What is the ideal application temperature?
70 to 80 °F. High temperature greatly affect cure time and pouch heat. Ensure pouch is at room temperature (approximately 70 °F or cooler) BEFORE mixing.
How do I store ProCrete?
Store in clean, dry, cool, low-humidity and shaded environment between 50 to 90 °F.
What is the service temperature?
Fully cured product can withstand temperatures from -40 to 212 °F intermittently.
Is ProCrete freeze/thaw stable?
Yes. Tested up to 50 freeze/thaw cycles.
Is ProCrete paintable?
Yes. Oil-based paints recommended. Test first to ensure compatibility and adhesion.
What are clean-up instructions?
Tools can be cleaned with soap and water, wiping off uncured material, or scraping cured product. Wash skin with soap and water.
What types of applications would I use ProCrete Premium Concrete Repair – Self-Leveling for?
HORIZONTAL APPLICATIONS ON: Warehouse floors/sidewalks/loading and shipping docks/parking garages and lots/statues/planters/airports/hotels/schools/stores/brick and stone walls/steps and more!
How do I avoid bubbling?
It is EXTREMELY important that the bottom of the surface to be repaired be cleaned out and completely dry. ProCRETE is sensitive to moisture and may bubble when curing if the area is not dry.
Do not spread the edges of the repair (feathering) any thinner than 1/8” to avoid any bubbling.
Can I use topping sand?
Topping sand can be applied to the surface of the repair AFTER the product has been applied and is still tacky. Do not mix topping sand into the liquid mixture under any circumstances.
PRODUCT IMAGES
| US 300 dpi / RGB / actual size |
150 dpi / RGB / 4 inch|600 pixels (H) |
| FAMOWOOD GLAZE COAT Epoxy Pint Kit 300 dpi US | FAMOWOOD GLAZE COAT Epoxy Pint Kit 150 dpi US |
| FAMOWOOD GLAZE COAT Epoxy Quart Kit 300 dpi US | FAMOWOOD GLAZE COAT Epoxy Quart Kit 150 dpi US |
| FAMOWOOD GLAZE COAT Epoxy Gallon Kit 300 dpi US | FAMOWOOD GLAZE COAT Epoxy Gallon Kit 150 dpi US |
| CANADIAN 300 dpi / RGB / actual size |
150 dpi / RGB / 4 inch|600 pixels (H) |
| FAMOWOOD GLAZE COAT Epoxy 0.94 L Kit 300 dpi CAN | FAMOWOOD GLAZE COAT Epoxy 0.94 Kit 150 dpi CAN |
| FAMOWOOD GLAZE COAT Epoxy 3.78 L Kit 300 dpi CAN | FAMOWOOD GLAZE COAT Epoxy 3.78 Kit 150 dpi CAN |
| Australia – New Zealand 300 dpi / RGB / actual size |
150 dpi / RGB / 4 inch|600 pixels (H) |
| FAMOWOOD GLAZE COAT Epoxy 0.47 L Kit 300 dpi AU | FAMOWOOD GLAZE COAT Epoxy 0.47 L Kit 150 dpi AU |
| FAMOWOOD GLAZE COAT Epoxy 0.94 L Kit 300 dpi AU | FAMOWOOD GLAZE COAT Epoxy 0.94 L Kit 150 dpi AU |
| FAMOWOOD GLAZE COAT Epoxy 3.78 L Kit 300 dpi AU | FAMOWOOD GLAZE COAT Epoxy 3.78 L Kit 150 dpi AU |
Featured Projects
Where to Buy
Please check your local store for product availability.
